Choosing The Most Classic And Stylish Interior Wood Shutters For Your Home

Anything made out of wood have a warm appeal. Interior wood shutters are installed close to the window glass pane since wood is an insulator. It becomes the barrier between the warm air inside the room and cold glass during winter time. As a result, energy costs are reduced because heat loss is minimized. There are different kinds of wood used in the production of wood shutters – basswood, oak, maple, alder, poplar and pine to name a few. Only wood shutters can be stained to enhance the grains of the wood.

Basswood

The best wood for building interior window shutter is basswood, which is a renewable resource. Careful hardwood forest management tree harvesting is done responsibly, balancing wood growth with wood removal. The United States grows as much hardwood as it harvest each year.

Basswood shutters are lightweight but strong, does not warp, low in resin and tannin that may bleed through finish, is a renewable resource which is replenished when harvested, is uniform in grain for a beautiful stain finish and has super gluing and finishing properties.

Oak Shutters

Oak interior wood shutters add more weight to window jambs and the screws require pre-drilling. Oakwood shutters are not suitable for painting and its louvers tend to warp.

Maple Shutters

Another heavy wood is maple, which produces interior shutters that are very heavy. Like shutters, the maple shutters add much weight to window jambs and requires pre-drilling of the screws. The louvers are hard to tension uniformly.

Poplar Shutters

Poplar shutters is moderately heavy for shutters. It is widely available and cost less. Poplar wood shutters mill and paints well but is moderately heavy for shutters. Its mineral streaks and green color make its wood unsuitable for staining. This type of wood produces a lesser quality wood shutter.

Alder Shutters

Next to basswood, Alder is another good choice for interior shutters. Alder is a small tree hence only shorter lengths are available. For tall window shutters, finger joints are required. Alder does not contain sap, pitch or mineral streaks that would result to bleed-through problems which could ruin the finish.

Pine Shutters

Pine is a soft wood used in making interior shutters. Although light wood, pine is a very strong wood, does not warp, swell up or shrink. This natural interior wood shutter can be stained with a vast selection of finishes, thus, enabling you to choose any shade that will complement your color scheme. There are different species and grades of pine available such that the quality of the shutter is likely to be inconsistent.

When you decide to use indoor window shutters for your home, always look for straight light hardwood such as basswood and self-tensioning louvers that will stay in place for the life of the shutter.